2. INSTALLATION
2-4
System Memories (Continue…)
DRAM Memory Installation Procedures:
1. The SIMM memory modules will only fit in one orientation
as shown because of a “Plastic Safety Tab” on one end of
the SIMM sockets which requires the “Notched End” of
the SIMM memory modules.
2. Press the memory module firmly into place starting from a
45 degree angle making sure that all the contacts are
aligned with the socket.
3. With your finger tips, rock the memory module into a
vertical position so that it clicks into place.
4. The plastic guides should go through the two “Mounting
Holes” on the sides and the “Metal Clips” should snap on
the other side.
5 To release the memory module, squeeze both “Metal Clips”
outwards and rock the module out of the “Metal Clips”.
10
EP-PV12 User’s Manual