Chipset Features Setup
The "Chipset Features Setup" includes settings for the chipset dependent
features. These features are related to system performance. It is highly
recommended that the items are optimal setting for this Main-Board. You
should not change them unless you are familiar with the chipset. Make sure
you fully understand the items contained in this menu before you try to
change anything. You may change the parameter settings to improve
system’s performance. However, it may cause system unstable if the
settings are not correct for your system configuration. Once you change the
setting and not sure which one will be better parameter, please load the
BIOS default by press “F6” or load the SETUP default by press “F7”.
SDRAM RAS-to-CAS delay
They are important parameters that affect the SDRAM performance. If your SDRAM
has unstable problem, change 2/2 to 3/3.
SDRAM CAS Latency Time
This setting defines the CAS timing parameter of the SDRAM in terms of clocks.
Sometime, the BIOS will recommend you to set the correct value depending on the
DIMM Module you use.
CPU Host Clock:
Set the CPU host Clock, the possible settings are 66, 68, 75, 83, 100, 103, 112, 133
MHZ
CPU Warning Temperature:
Set the warning temperature, if the CPU temperature is over the setting the PC
speaker will alarm to user. The feature should work with the thermal sensor on the
Mother Board beside the CPU slot.
