1. Insert the
attach mount bridges
(For the remaining instructions) into
the bottom of the mainboard with the curved edges facing outwards,
toward the edge of the mainboard.
2. Use a screw driver to lightly tighten the
attach mount bridges and the
Pentium II Retention Mechanism
3. Insert the Pentium II processor into the Pentium II retention Mechanism
with the processor Heatsink. Press evenly and gently until the snaps on
the upper side of the processor have been inserted into the holes at the
top of the retention base. Note that when removing the processor, these
snaps can be clicked into a completely vertical position, leaving your
hands free to stabilize the board and pull the processor evenly and
gently out of the board. Also note that like PCI and ISA slots, Slot 1 has a
divider that prevents backwards insertion.
4. Attach the Thermal Sensor (optional): If you purchased the specially
designed thermal sensor, you can contact the thermal sensor to the CPU
Heatsink as nearest as possible.
CPU 1
CPU 2
CPU1 FAN
CPU2 FAN
CPU
Thermal
Sensor
