eNovates Single Wallbox, Руководство по установке

Страница: 18 / 32

Install the wall bracket.
1) The standard installation height is 100 to 110 cm from the floor or
ground, measured from the center of the socket. The wall bracket
contains three pill-shaped clearance holes for installation. Use the
clearance holes to mark the positions on the wall where the holes
should be created, and then drill the three holes.
104-114 c m
Note: Use proper levelling tool to make sure that the wall bracket
is levelled.
Make sure the position of the bracket provides at least 30
centimeters of space around the charger when the charger is
attached to it.
Lead the cables through the circular holes at the bottom of the
bracket. Use either the holes in the back support, or the holes in
the bottom support, as is most convenient for your cable setup.
2) If the mounting surface consists of concrete or brick, fix the
bracket securely to the wall using the provided 3 8mm plugs and
3 M6x30 screws. If there is a different type of mounting surface,
another fixing method must be used.
Note: Make sure the bracket is level and sturdy.
Secure the cable block to the wall bracket.
1) Position the cable block onto the bottom of the wall bracket using
18