ENOCHS Power 4510, Инструкция по установке и эксплуатации, Страница: 6 / 12

Preventative Maintenance Checklist
Maintenance of the table is responsibility of the owner. Manufacturer recommends
following areas be inspected by certified technician every six months to assure proper
operation of table. Copy of this checklist should be used for each inspection and
maintained in table’s master file. Each inspection area is required to indicate a pass or
fail status. ALL AREAS failing inspection must be serviced/repaired immediately by
certified technician. See ENOCHS Service Manual for Power Encore Series Tables for
repair/service advice and instructions. Direct all questions to ENOCHS Technical
Support at 1-800-428-2305.
Serial Number:
EL
Inspection
Date:
PASS FAIL
INSPECTION AREA
 
grounding continuity
 
mains power cord and electrical plug free from all nicks, cuts, abrasions or
any other damage.
 
mains power cord ON/OFF switch operates.
 
mains power indicator light on front face plate functional.
 
t
able’s receptacles functional (applicable on 4550 & 4520 with this option)
 
Instrument warming drawer indicator ON/OFF switch functional.
(applicable on 4550 & 4220 with warming drawer option)
 
warming drawer functional (applicable on 4550 & 4520 with this option)
 
all foot control pedals move freely, returning to neutral position without
sticking (applicable on all tables with this option)
 
foot control power cord free of damage and firmly held in place by strain
relief at back of foot control and at table base
 
TABLE UP/DN functions exhibit smooth range of movement
 
BACK UP/DN functions exhibit smooth range of movement
 
pelvic tilt adjusts smoothly and easily
 
leg extension moves freely in and out of table
 
irrigation basin drawer moves freely in and out of table
 
stirrup length and lateral adjustments have smooth range of movement
 
upholstery is free from cuts, rips or punctures
 
accessories rails (if applicable) are secure
 
accessories in good working order
PRODUCT AT A GLANCE
6 19
Range of Motion
Power Back: 0º horizontal to +80º =± 2º
Power Height: Min:
18.5” ± .25 in. Max: 38” ± .25 in.
Stainless Steel
Irrigation basin
Perineal
recess
Adjustable stirrups
Pelvic tilt
Range of Motion
Min: Flat
Max.: 11º ± 2º
Pull-out
leg extension
Paper cutter
Paper roll holder
Instrument warmer
drawer
(optional on models
4550 & 4520 only)
Power back
Side drawer
storage
(not
available on 4510)
Stainless steel drawer
(standard on all models)
Mains Power light
Mains Power Input Module
Instrument Warming
Drawer ON/OFF SWITCH
(on models with optional
warmer drawer )
Power Height
Foot control
(standard on models 4520 & 4510,
optional on model 4550)