1. GENERAL DESCRIPTION
The
receiver module RCM 152
is used to receive and to process telegrams generated and
transmitted by EnOcean radio transmitters. These modules can be easily integrated into
control and switching units for the implementation of different application-specific system
solutions.
1.1 Basic Functionalities
For the implementation of different application-specific system solutions the RCM radio
modules can be easily integrated into control and switching units by using the functional
control outputs (“open collector”).
The RCM 152 is a firmware variant of the RCM 1xx receiver family of EnOcean. The hardware
is fully compatible.
Each RCM 152 receiver can be assigned, either a maximum of 30 EnOcean PTM radio switches,
or up to 2 EnOcean easyfit STM 250 radio window contacts. Learning of mixed PTM and STM
transmitters is not possible. By assigning the first transmitter the operating mode is defined.
The operating mode can only be changed at empty ID memory, e.g. after deleting all
transmitters with the CLR button.
Mode RADIO SWITCH
: Each assigned transmitter can be used to change the switching state
of the receiver. It is possible to switch ON with one switch and OFF with another switch.
Mode RADIO WINDOW CONTACT
: If at least one of the assigned window contacts is open
the switching state of the receiver is ON. If both contacts are closed the state is OFF. The radio
window contacts are transmitting a life signal typically every 15 min. Around 60 min after
reception of the last life signal the receiver considers this contact to be closed.
Figure 1: Receiver module RCM 152
1.2 Typical Applications
•
Building installation
•
Industrial automation
•
Consumer electronics
©EnOcean GmbH
Page 4 of 20
RCM 152 User Manual V1.31
