USER MANUAL
PTM 535 / PTM 535U / PTM 535J
–
ENOCEAN TRANSMITTER MODULE
© 2019 EnOcean | www.enocean.com
F-710-017, V1.0
PTM 535 / 535J User Manual | v1.5 | September 2020 | Page 17/36
4.2
PTM 535 configuration interface
The PTM 535 configuration interface consists of test points MP1- MP6. The function of these
test points is summarized in Table 2 below.
Table 2
–
PTM 535 configuration interface
4.3
PTM 535 test point location
Figure 8 below shows the location of the
test points MP1 … MP6
. For the exact location
refer to the product drawing in chapter 1.6.
Figure 8
–
PTM 535 test point location
Pad
Signal
Name
Characteristics
Segger
J-Link Signal
Segger
J-Link Pin
MP1 VCC
Configuration interface
(Supply voltage)
VTref
1
MP2 GND
Configuration interface
(Ground)
GND
4/6/8/10
/12
MP3 TDIO
Configuration interface
(Data)
TMS
7
MP4 TCK
Configuration interface
(Clock)
TCK
9
MP5 V+
Power supply (from Segger)
5V-Supply
19
MP6 RESET
Optional
RESET
15
