USER MANUAL V0.8
© 2009 EnOcean | www.enocean.com
PTM 33x / 33xC User Manual V0.8 | Page 17/20
PTM 33X / 33XC
4
AGENCY CERTIFICATIONS (in preparation)
The modules have been tested to fulfil the approval requirements for CE (PTM 33x) and
FCC/IC (PTM 33xC) based on the built-in firmware.
4.1
CE approval
The modules bear the EC conformity marking CE and conforms to the R&TTE EU-directive
on radio equipment. The assembly conforms to the European and national requirements of
electromagnetic compatibility. The conformity has been proven and the according docu-
mentation has been deposited at EnOcean. The modules can be operated without notifica-
tion and free of charge in the area of the European Union, and in Switzerland. The following
provisos apply:
•
EnOcean RF modules must not be modified or used outside their specification
limits.
•
EnOcean RF modules may only be used to transfer digital or digitized data.
Analog speech and/or music are not permitted.
•
The final product incorporating EnOcean RF modules must itself meet the es-
sential requirement of the R&TTE Directive and a CE marking must be affixed
on the final product and on the sales packaging each. Operating instructions
containing a Declaration of Conformity has to be attached.
•
If the transmitter is used according to the regulations of the 868.3 MHz band,
a so-called “Duty Cycle” of 1% per hour must not be exceeded. Permanent
transmitters such as radio earphones are not allowed.
•
The module must be used with only the following approved antenna(s).
Type
Parameter
Value
Wire/Monopole at RF_WHIP Maximum gain
1.0 dBi
External antenna at RF_50 Antenna type
Passive
Impedance
~50 Ohm
Maximum gain
≤
0 dBd
