USER MANUAL
ETHSA / ETHSU
ENOCEAN TEMPERATURE AND HUMIDITY SENSOR
© 2022 EnOcean | www.enocean.com
F-710-017, V1.0
ETHSx User Manual | April 2022 | Page 15/27
Figure: Mode Transitions
The following pushbutton timing is implemented:
•
Short press:
around 1s
(firmware 0.1
–
3.0 s)
•
Long press:
around 5s
(firmware 3
–
7 s)
•
2x long press with very short pause of max. 1 s between
Before changing the operating mode please make sure to clear the device from all
receivers which have been taught to work with this device before. Otherwise the
receiver will ignore the telegrams and the application will not work.
The flag for actual mode itself is stored in non-volatile memory. After power down
reset the previous selected mode is active. The mode change is limited to 50 times.
In normal application scenario only very few are required.
