USER MANUAL
ETHSA / ETHSU
ENOCEAN TEMPERATURE AND HUMIDITY SENSOR
© 2022 EnOcean | www.enocean.com
F-710-017, V1.0
ETHSx User Manual | April 2022 | Page 11/27
2.8
Device Label
The structure of the ETHSx device label is shown in following Figure:
Figure: Unit Label
2.8.1
Step Code
The Step Code describes the functional product status of the device and can be found on
the product label between the product ordering code and the unit’s serial number.
In the
upper figure the step code is “DA”.
2.8.2
QR-Code
In order to improve logistic and commissioning of the sensor unit a QR code can be found
on the unit label. The QR code used in the new product label encodes the product parame-
ter according to the ANSI/MH10.8.2-2013 industry standard.
Figure: QR Code Example
The QR code shown in the example figure above encodes the following string:
„30S0000030PS3001-C350+S01123456123456“
The following table shows the interpretation of the data therein:
Identifier Length of data exclud-
ing identifier
Value
Comment
30S
12 characters
ID, Static Source Address hex
30P
10 characters
Ordering Code
“S3001
-
C350”
2P
4 characters
Step code and revision
“DA
-
01”
S
14 characters
Serial Number
Table: QR Code content
