What You Need to Prepare Before Installing the Sauna
1. Choose the right Outdoor space and clear it out for the sauna.
2. When determining a location for your sauna, please keep in mind the following:
●
The main power cord on the sauna must be easily accessible.
○
When facing the sauna, the cord is located behind the back wall in the lower left
hand side corner.
●
The location must be dry and leveled.
3. You will need a solid and leveled base. The sauna cannot sit straight on the ground.
4. Check the Electrical requirements for your specific unit and make sure you have it available.
Please contact an electrician if you require assistance with this.
5. For a traditional heating system: Hardwire is recommended. Plug can be sent separately if
preferred. For Infrared: it is a plug.
6. Prepare a Sealant to seal the sauna during the Installation of the sauna.
7. Tools: Phillips screwdriver, flat screwdriver, sealant gun. An Electric screwdriver will speed up
the process.
8. Print or have your manual available during the installation.
9. Tech support for installation is available only at pre-scheduled time. Submit a ticket online to
schedule time
prior 72 hours
of installation.
10. If you plan to have an electrician on site before the sauna arrives, schedule a phone call with
our technician at least 72 hours in advance for a pre-installation process questions.
Electrical Components/Requirements
Please Read Carefully!
Traditional Heating System/Harvia: Hardwire is recommended, if you opt for a plug, we will send you
a plug for the BC45-E heater specs.
Each hybrid sauna will require 2 dedicated circuits when plugged into an outlet according to the chart
below. A “dedicated circuit” requires that no other appliance should share the outlet/circuit with the
sauna. Failure to comply with this requirement may cause an electrical interruption and/or a
diminished performance. To avoid any potential electrical hazards, it is recommended that only a
qualified electrician installs your dedicated electrical wiring for a proper sauna functionality. Please
3
