Step 2. REAR PANEL Placement
Place the rear panel on the back end of the floor panel. At this point, someone should hold the rear
panel until the next connection is made.
Step 3. LEFT PANEL Placement
Install the left panel (the left panel has 2-4 sockets on the lower end) as the image below. Make sure
the top of both panels is flat and leveled.
Refer to the “
Connecting the Panels
” section on how to lock the panels together.
Step 4 and 5. SIDE PANELS Placement
Connect the side panels to the back panel as in the image below (Figure C-2).
Refer to the “Connecting the Panels” section on how to lock the panels together.
Figure C-2: Rear, Left and Right Panels
13
