ENKHO 158381.01, Оригинальное руководство пользователя

Страница: 31 / 70

31
EN
come into contact with the eyes etc.
The battery must only be charged up in dry areas.
Never charge the appliance when the temperature is below 4 ºC or above 40 ºC.
Only indoor use!
Never operate the charger with a damaged power cord or power plug. Damaged
cord or plug can result in danger to life due to electric shock.
The device cannot be used while it is being charged.
1. Connect the Micro USB plug of the charging cable (9) to the charging socket (3) on the
appliance, and connect the USB charging cable (8) to the charger (7).
2. Insert the mains plug of the charger into a socket. The battery charge level indicator (2)
lights up and the appliance battery is being charged up.
3. The recommended charging time is 3 hours.
NOTE: If the battery charge level indicator (2) is red and flashing, means there is
problem on the battery. Stop charging and send it to Service Centre to get repaired.
4. After charging, first remove the mains plug of the charger from the socket. Then
disconnect the Micro USB plug of the charging cable (9) from the appliance.
Checking the battery charge level
The battery status is displayed as follows by the three LEDs of the battery charge level
indicator (2).
LED color Meaning
Green-Orange-Red Maximum charge/power
Orange-Red Medium charge/power
Red Weak charge – Recharge the battery
Assemble /dismantle the attachments (Fig. C & D)
WARNING!
Risk of injury. Always switch the device off and put the rotation direction switch in the
middle before carrying out any work on the appliance to prevent unintentional switching on.
1. Start by removing the rubber cap (17) from the tool holder (6).
2. Press the two lock buttons (10) simultaneously on the both sides of the front part of