ENKHO 158377.01, Оригинальное руководство пользователя

Страница: 22 / 57

EN
22
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
e) Do not use a battery pack or tool that
is damaged or modified. Damaged
or modified batteries may exhibit
unpredictable behavior resulting in fire,
explosion or risk of injury.
f) Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire
or temperature above 130°C may cause
explosion.
g) Follow all charging instructions and do not
charge the battery pack or tool outside
the temperature range specified in the
instructions. Charging improperly or at
temperatures outsides the specified range
may damage the battery and increase the
risk of fire.
Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that
the safety of the power tool is maintained.
b) Never service damaged battery packs.
Service of battery packs should only
be performed by the manufacturer or
authorized service providers.
Specific safety instructions for impact
wrench
∫ Hold the power tool by insulated gripping
surfaces, when performing an operation
where the fastener may contact hidden
wiring. Fasteners contacting a "live" wire
may make exposed metal parts of the
power tool "live" and could give the operator
an electric shock.
∫ Wear hearing protection when impact
screwing. Exposure to loud noise can lead
to hearing loss.
∫ Secure the workpiece! A workpiece securely
held by a clamping device or vice is much
safer than one held in your hand.
∫ Hold the power tool firmly. High torques can
occur for brief periods while tightening and
loosening screws.
∫ Wait until the power tool has come to a
stand¬still before putting it down. The tool
can jam, this leading to loss of control of
the power tool.
Special safety instructions for battery-
operated tools
a) Ensure that the tool is switched off before
inserting the battery. Inserting a battery
into a tool that is switched on may result in
accidents.
b) Recharge the batteries indoors only
because the battery charger is designed
for indoor use only. Risk of electric shock.
c) To reduce the electric shock hazard,
unplug the battery charger from the mains
before cleaning the charger.
d) Do not subject the battery to strong
sunlight over long periods and do not leave
it on a heater. Heat damages the battery
and this is risk of explosion.
e) Allow a hot battery to cool before charging.
f) Do not open up the battery and avoid
mechanical damage to the battery. Risk
of short circuit and fumes may be emitted
that irritate the respiratory tract. Ensure
fresh air and seek medical assistance in the
event of discomfort.
g) Do not use non-rechargeable battery. This
could damage the appliance.
h) The recommended ambient temperature
range for the charging system during
charging is from 4ºC to 40 ºC.
i) The recommended ambient temperature
range for tool and battery storage is from
0ºC to 50 ºC.
j) The recommended ambient temperature
range for tool and battery use is from -5ºC
to 50 ºC.
k) Remove the battery from the device before
storage.