ENKHO 158377.01, Оригинальное руководство пользователя

Страница: 19 / 57

EN
19
2. Introduction
The operating instructions are part of
this product and contain important
information on safety, use and disposal. It is
essential that you read the instructions before
assembling, operating and maintaining the
product. Use the product only as described and
for the range of applications specified. Keep this
manual safely and in the event that the product
is passed on, hand over all documents to the
third party.
Intended Use
The appliance is intended for screwing in and
loosening screws as well for tightening and
loosening nuts. The appliance has a clockwise/
anticlockwise rotation, a 1/2” external square
drive bit holder and an LED working light which
is intended to illuminate the working area. The
rotary impact function of the appliance enables
the power of the motor to be converted into
uniform rotary impacts. The Impact mechanism
comes into effect during tightening and
loosening.
And the appliance is designed for use by adults.
This appliance is not intended for commercial
use. Any other uses or modification to the
product are deemed to be improper usage
and carries a significant risk of accidents. The
manufacturer accepts no responsibility for
damage(s) attributable to misuse.
Scope of delivery
Carefully unpack and check that it is complete:
- 1x Battery-operated impact wrench
- 1x battery charger
- 1x battery pack 4.0Ah
- 4 x Socket: 17mm / 19mm / 21mm / 23 mm
- 1 x belt clip
- 1x carrying case
- 1x Instruction manual
Overview (Fig. A-C)
1. Tool holder
2. Rotation direction switch/lock
3. Belt clip
4. Battery charge level button
5. Battery level indication LED
6. Battery pack
7. Battery release button
8. LED work light
9. Torque preselection button
10. ON/OFF switch / speed control
11. Sockets (17/19/21/23 mm)
12. Charger
13. RED charge control LED
14. GREEN charge control LED
Technical data
20V impact wrench 158377.01
Rated voltage 20V d.c.
Rated no-load speed: 0-2300/min
Rated impact rate 0-3000 /min
Max. Torque 400Nm
Torque at 4 levels
100 /200/300/400
Nm
Tool holder 1/2”
Weight (without
charger)
2.45kg
Battery pack 151219.01
Type Li-ion
Rated voltage 20V d.c.
capacity 4.0Ah (80Wh)
Quick charger 151443.01
Rated input 230-240V, a.c., 50Hz
Power consumption 94W
Rated output 21.5V d.c.
Charging current 3.5A
Charging time Approx. 90min
Protection class II
Noise emission value
Noise measurement value determined in
accordance with EN 62841-2-2
L
PA
87.64dB(A)
Uncertainty K 3dB
L
WA
98.64dB(A)
Uncertainty K 3dB
Vibration emission
value
Vibration value determined in accordance
with EN 62841-2-2
a
h
7.41m /s
2
Uncertainty K 1.5 m/s
2