6
EN
HOW TO USE
Fig. 2
Fig. 1
P
Ⅱ
0
Ⅰ
P
Ⅱ
0
Ⅰ
1.
Place ingredients in the cup. Do not add ingredients over 600ml (600ml cup) or 300ml (300ml
cup) marked on the cups.
2.
Tighten blade unit securely to the cup. (Fig.1)
3.
Hold the cup upside down and turn cup with blade unit to lock in place.(Fig.2)
4.
Plug smoothie maker into power outlet.
5.
Start blending by turning switch knob to the speed you want (P, I, II).
Note:
P mode is for blending solid or thick ingredients. Hold switch knob to “P” position to
start blending. Release to stop blending.
WARNING:
Risk of injury, never attempt to place the blade on the motor unit without the cup. The
blade has a safety mechanism and cannot operate without the cup attached.
Do not operate the appliance continuously more than 2 minutes at a time. Allow blender cool off
for 1 minute before the next operation.
Note:
6.
Stop blending when smoothie reach your desired consistency, turn switch knob to “0”
position.
7.
Remove cup with blade unit from the motor unit, hold cup and turn to unlock to detach
from motor unit. Untighten blade unit from cup.
8.
Place cup on a flat and stable platform, cover it with lid and fasten securely to the cup.
9.
Unplug the appliance and make sure switch knob is on “0” position after use.
1.
Always crushing ice cubes before blending, to avoid damage to the appliance!
2.
Wash and peel fruit/vegetables before operation.
3.
Cut the large fruit/vegetable into small pieces before added in the cup.
p
Pulse
0
Off
I
Low speed
II
High speed
