8
Installing the Canopy Housing
1.
Screw in two threaded rods into the Hanger Bracket
(Figure 1a).
NOTE: The threaded rods in the hanger bracket serves
as guides for easier installation.
2.
Securely attach the Canopy Housing to the Hanger
Bracket using the external lockwashers and knurled
knobs supplied with your fan (Figure 1b).
Figure 1a
Final Assembly - Options
1.
Carefully screw the bulb in the socket
fi
rmly (Figure 1).
2.
Restore power.
Figure 1
NOTE: This step is applicable after the neccessary
wiring is completed. (see page 19)
NOTE: Supply wires and fan wires omitted for clarity
1.
To install lower cap - screw in lower cap into bulb
socket until tight. (Figure 3)
2.
Restore power.
Figure 2
▲
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy housing
and not pinched between the housing and the ceiling.
▲
WARNING
To prevent over-heating or electrical
fi
res, use ONLY
PAR30, short-neck halogen bulb, 75 watt max, as
speci
fi
ed (bulb not included).
▲
WARNING
Do NOT install lower cap while the ceiling fan is on!
Figure 1b
Light Bulb Option:
Lower Cap Option:
CAUTION
To avoid possible electrical shock, be sure electricity
is turned off at the main fuse box before installing light
bulb.
