ENHANCE SPECTRA E11, Руководство пользователя

Страница: 14 / 31

14
3. Application Instruction
3.1 Video Output
3.1.1 Power-On Initial Configuration
Connecting the power, the camera will have initial configuration, R indicator light will be flashing. When the
camera return to the HOME position (middle position for P/T) and the lens finish zooming in/out, the auto-testing
is finished. IR led will also stop flashing. If the preset 0 is set, the camera will rotate to the 0 preset positions after
the initial configuration.
3.1.2 Video Output
Connect to the video output cable: the user select the output mode according to the machine model. Figure 1.1 is
for your reference (output interface introduction for each product)
USB2.0 output: Connect the product with the computer's USB2.0 interface, open the Device Manager to see whether there is an
image device and whether the Universal Serial Bus controllers recognize USB2.0 device. After it is properly identified, open the
software, choose the image device, and then it will output the image.
3.2 Remote Controller