ENGWE-BIKES SJB-1, Руководство по эксплуатации и обслуживанию

Страница: 10 / 20


Assembly - Step 5: Charging the Battery
Remove the charger from the box, attached the power cord and insert that to any
wall outlet. Insert the plug at the end of the smaller cable into the charging terminal
of the battery and start charging. The charging terminal is on the side of the battery
opposite to a hole on the side of the frame. The LED on the charger glows RED
while charging and glows GREEN when charging is complete. The battery should
be turned OFF while being charged. When the LED on the charger turns Green,
disconnect the charging cord and cover the charging terminal with the rubber cap.
The battery has a series of LEDs as charge level indicators. There is a similar
series of LEDs on the handlebar. If a battery is installed on the e-bike and turned
ON, the LED indicators will show the charge level of the battery
.
You are now ready to start using your e-bike.
- 9 -