background image

 

 

 

 



Pedal-Assisted 

 

You must turn on the ignition lock to use the e-bike in pedal-assisted mode. 

 

In the pedal-assisted mode, power assist is triggered when you pedal forward, and 
power assist stops when you stop pedaling. In other words, power assist happens 
as long as you pedal. You don't need to pedal hard. All you need is to apply a light 
force to the pedals continuously to maintain the current flow. When you apply one 
of the brakes, power assist will automatically stop, allowing the e-bike to slow down 
and stop. Power assist will turn itself off when the e-bike has reached the maximum 
speed of 15 mph. 

 



Hand Throttle Control 

 

In the hand throttle mode, amount of power assist is determined by the throttle 
switch controlled by your right hand. You control the throttle by twisting it from its 
resting position, the farther the throttle switch is from its resting position, the more 
power is delivered to the motor to accelerate the e-bike. When you want to slow 
down, you simply release the throttle and let it return to its resting position, and 
simultaneously apply the brakes if necessary. 

 

You do not need to pedal the e-bike if you use the hand throttle. However, you 
can pedal while commanding power assist. If you do pedal to help the 
movement, you conserve energy and the charge in the battery will last longer. 

 



Cruise Control 

 

You can trigger this function when you hold twisting the throttle bar for 10 seconds, 
and you can call off it with pressing the brake bar or twist the throttle bar. 
 



Charging Your e-Bike Battery 

 

Your e-bike battery is a lithium-ion battery. Lithium-ion battery requires specially 
designed chargers. You should never charge your battery with a substitute 
charger that is not designed for this use. Use of an unsuitable charger to charge a 
lithium-ion battery will result in overheating, fire or even explosion. If your charger 
is lost or damaged, contact your dealer to order a replacement. 

 

Charge your battery while the e-bike is not in use. You should turn off the ignition 
lock before you charge it.  

 

Do not place either the charger or the battery near flammable substances while 
charging is taking place. Charging should not be done in the vicinity of infants and 
small children. It is also prudent to remove valuable objects from the immediate 
vicinity of the battery while it is being charged. 

 

The length of charging time depends on the level of charge the battery still holds. If 
a battery is completely discharged, it will take 6 hours to be fully recharged. When 
a battery is fully charged, the LED on the charger will transition from RED to 
GREEN. At this point, you should disconnect the charger. Do not leave the charger 
connected to the battery for a very long period of time after charging is complete. 
(Leaving it connected for an overnight charging is OK.) 

 

It is normal for the charger and the battery to be slightly hot while charging is on-going. 

 
 
 
 
- 11 - 

Содержание SJB-1





















Отзывы: