(e) Fix wall retainer to wall using 4
screws
(supplied).
± 0 mm
± 0 mm
3 mm
Door wall retainer
Return wall retainer
x4
2.1 Wall Retainers
Caution:
Ensure tray or tiled floor is
level & walls are vertical & square.
(a) Mark the locations of the wall retainers.
For tray base option:
- Mark 10mm in from top edge of tray.
For tiled base option:
- Mark from finished wall to outer edge
of retainer.
(c) Position a wall retainer on a wall with
flat side facing outwards. Use a level to
make sure it is upright. (This is critical
to ensure correct operation of the door).
(b) This shower is reversible. Please
choose which side you would like the
door to be on and install wall retainers
accordingly.
(d) Mark position of fixing holes, then
remove wall retainer and drill holes
using an appropriate 3mm drill bit
(not supplied).
Tip:
Cover the waste to prevent the loss of
small parts. If installing onto a tray protect
the tray surface during installation.
2 - INSTALLATION
Page 5
INSTALLATION INSTRUCTIONS
MILANO
Square
10 mm
10 mm
x4
± 0 mm
x 4
PAN ST 35mm
B
900 x 900
1000 x 1000
1200 x 900 LH
1200 x 900 RH
875 875
975 975
1175 875
875 1175
A
Size
B
A
