(a) Ensure distance from edge of tray to
frame extrusions is equal.
(e) Insert and tighten handle grub screws
using hex key
(supplied).
(b) Ensure corner post faces are plumb
and vertical. Adjust panel engagement
in wall retainers as necessary. This step
is critical to ensure correct operation of
the door.
(c) Drill 4 x 3mm holes from inside shower
enclosure in door extrusion through
pre-drilled holes in wall retainer.
(d) Fix extrusion to wall retainer with
pan screws
(supplied).
(e) Repeat steps (c) and (d) for other
wall retainer.
Page 8
INSTALLATION INSTRUCTIONS
MILANO
Square
2.5 Frame Fixing - Wall Retainers
3 mm
x4
± 0 mm
± 0 mm
=
=
=
=
x 4
PAN ST 9mm
2.5mm
2.5mm