ENGLEFIELD
DURACYL WALL
INSTALLATION INSTRUCTIONS
KOHLER NZ LTD
NEW ZEALAND
Free Fax: 0800 664 488
Free Ph: 0800 100 382
www.englefield.co.nz
KOHLER CO.
AUSTRALIA
Free Ph: 1 800 ENGLEFIELD
(1 800 364 533)
www.englefield.com
For warranty information, please visit our website.
CONTACT & WARRANTY INFORMATION
To install the wall follow the approved
adhesive manufacturer instructions.
As a general rule, place wall into position. Press
firmly back into corner to ensure that wall makes
full contact with the corner along its entire length.
Press into corners
fi
rst, then press toward
edges. Use a soft clean cloth to press
fi
rmly
and remove any rippling along glue lines.
Check and repress if necessary.
Allow the adhesive to cure before installing the
shower or bath and/or using the enclosure.
CLEANING INSTRUCTIONS
Use non-abrasive soap and warm water.
Avoid:
• harsh chemicals and disinfectants.
• abrasive cleaners
• solvent based cleaners
• acid or alkaline cleaners
• products containing ammonia or peroxides.
Wipe out the unit after each use to prevent
build-up of soap and scum.
Always read the label instructions on any
cleaner carefully before applying it to the
surface.
Page 8
DURACRYL WALL INSTALLATION CONT...
Remove the plastic film from liner before use.
Read the Care & Maintenance
label on the wall and leave it
in place for the end user.
!
IMPORTANT
