23
0
button
5
button
1
button
6
button
2
button
7
button
3
button
8
button
4
button
9
button
Down
button
Up
button
Display
LED
1 - 4
0
1
2
3
4
Down
5
6
7
8
9
Up
Bank or
MPN
MIDI Channel
Setup:
press Down & Up
simultaneously
until >c< appears
at the left;
select the
desired MIDI Channel
via Down or Up;
press 0 to store the setting
or press 9 to quit the Setup.
MIDI
Footcontroller
Z-15
Cn.1 Setup
Write
Linear Positve
Cn. value down
Linear Negative
Cn. value up
Log. Positive
Cn. initial value
Log. Negative
confirm MPN
Cn. S. I.10 ms
Switch Loop 1
Cn. S .I. 20 ms
Switch Loop 2
Cn. S. I. 30 ms
Switch Loop 3
Cn. S. I. 50 ms
Switch Loop 4
Cn.2 Setup
End
Internal Continuous
Controller:
Activate MIDI Program
Direct Access Mode;
press 1 or 2 to send
controller commands;
press 3 to switch between
controller default and
initial values.
MIDI Program
Bank Mode:
Active after power up;
Press Up & Down
to select bank 1 - 13;
press 0 to 9 to select
desired MIDI program
no. (MPN)
Controller 1 Setup for
Cont. Controller 1:
Press 0 in the
first bank (00x)
until >Cn.1< appears.
Changing settings:
Controller number:
Down or Up.
Controller curve:
1, 2, 3, 4.
Controller command
send interval:
5, 6, 7 8.
Press 0 to store.
MIDI Program
Direct Access Mode:
Press 0 in the
first bank (00x)
until >Cn.1< appears;
or
press 9 in the
last bank (12x)
until >Cn.2< appears,
then press 9;
press Down or Up to
select the desired MPN;
press 4 to confirm
selected MPN.
Amp
Technology
Tube
R
Power
Supply
7-12 Volts AC
9-15 Volts DC
300 mA
MIDI
Out
Cont.Controller 1
Input
Cont.Controller 2
< Input
Switch Loop
3 & 4
Switch Loop
1 & 2 >
Switch Loop Setup:
Activate MIDI Program
Direct Access Mode;
select the desired MPN,
press 4 to confirm;
set switch loop status
to on or off using
5, 6, 7, 8
for the respective loop.
Press 0 to store.
Controller Setup for
Cont. Controller 2:
Press 9 in the
last bank (12x)
until >Cn.2.< appears;
Changing settings:
Controller Number:
Down or Up.
Controller curve:
1, 2, 3 4.
Controller command
send interval:
5, 6, 7, 8.
Press 0 to store.
Switch
Loop 1
Switch
Loop 2
Switch
Loop 3
Switch
Loop 4
Control Panel Layout
Connections on the rear panel
MIDI
Out
Power
Supply
Cn.2
Input
Cn.1
Input
Switch
Loop
1 & 2
Switch
Loop
3 & 4
Wiring of Principal Connectors
MIDI Out, DIN connector
Stereo
1/4" jack
Controller Input
sense input
reference voltage:
Ground, GND
Use a stereo
plug only!
Never feed
current into
this port!
Switch Loop
1 & 2
(3 & 4)
SWITCH 1
SWITCH 2
Switching loop´s schematics:
(SWITCH 3)
(SWITCH 4)
+3 Volts, 13,5 mA max.
*: Power supply from
ENGL devices that are
equipped with a MIDI IN
port.
The corresponding
configuration switch
at the amp must be set
to the position
ENGL MIDI Footcontroller
.
Pin 1 - power supply
via MIDI cable *
Pin 4 - MIDI-data wire
Pin 5 - MIDI-data wire
Pin 2 -
power supply
via MIDI cable *
Pin 3 - N.C.
page: 11
page: 11
page: 12
All manuals and user guides at all-guides.com
