Engl Screamer 50 II Combo E330II, Руководство оператора

Страница: 15 / 16

Configuration table for assigning the Screamer II Amp‘s sound-shaping and special functions to the
ENGL Z9 footswitch‘s Functions 1 and 2:
S.A.C.:
Comments:
Column 1
lists the Function button on the ENGL Z9. Column 2 lists the sound-shaping and special functions
that can be assigned to it.
Column 2 lists sound-shaping and special functions on the ENGL Screamer II Amp that can be controlled
remotely via the ENGL Z9.
Column 3 lists the configuration or setting required to remote-control sound-shaping or special functions
on the Screamer II Amp. The first digit indicates the Function Setup routine, that is,
1: for Function 1 Setup and 2: for Function 2 Setup. Channel 1 to Channel 4 denotes the button used to enter
the setting.
Column 4 indicates the currently or newly selected configuration. For example, if LED 3 flashes when the
ENGL Z9‘s function 2 Setup routine is activated, then the Screamer II Amp‘s FX Loop switching feature is
currently assigned to Function 2 the corresponding S.A.C. command is F2-7.
Column 5 lists the shorthand designations for specific configurations that appear throughout the ENGL Z9
Operator‘s Manual. For detailed information, please refer to the ENGL Z9 Operator‘s Manual.
Please note: The ENGL Z9 is an optional accessory. The afore mentioned Function buttons, LEDs and setup
routines pertain to the ENGL Z9.
Whilst the information contained herein is correct at the time of publication, due to our policy of constant
improvement and development, ENGL AMPLIFICATION reserves the right to alter specifications without prior
notice.