EnGenius EWS330AP, Руководство пользователя

Страница: 15 / 63

15
1. Ensure that the computer in use has an Ethernet
Controller port (RJ-45 Ethernet Port). For more
information, verify with your computer’s user manual.
2. Connect one end of the Category 5e Ethernet cable into
the RJ-45 port of the EWS330AP and the other end to
the RJ-45 port of the computer. Ensure that the cable
is securely connected to both the EWS330AP and the
computer.
3. Connect the Power Adapter DC connector to the DC-IN
port of the EWS330AP and the Power Adapter to an
available electrical outlet. Once both connections are
secure, verify the following:
a) Ensure that the POWER light is on (it will be orange ).
b) Ensure that the 2.4 GHz/5 GHz WLAN light is on (it will
be blue for 2.4G, and green for 5G).
c) Ensure g that g the h LAN g (Computer g EWS330AP g Connection)
light is on (it will be blue ).
d) Once all three lights are on, proceed to set up the
Access Point using the computer.
This diagram depicts the hardware configuration.
Hardware Installation
Ethernet
PC
Power
Outlet
AC/DC
Cable