Long Range Wireless Access Point / Client Bridge
Version 1.0
50
Authentication Type:
Select an authentication method. Options available are
Open
Key
,
Shared Key
or
Auto
. An open system allows any client to authenticate as long
as it conforms to any MAC address filter policies that may have been set. All
authentication packets are transmitted without encryption. Shared Key sends an
unencrypted challenge text string to any device attempting to communicate with the
Access Point. The device requesting authentication encrypts the challenge text and
sends it back to the Access Point. If the challenge text is encrypted correctly, the
Access Point allows the requesting device to authenticate. It is recommended to
select Auto if you are not sure which authentication type is used.
Input Type
: Select He or ASCII from the drop-down list
Key Length
: Select a key format from the drop-down list. 64bit-hex keys require 10
characters, where as 128-bit keys require 26 characters. A hex key is defined as a
number between 0 through 9 and letter between A through F.
Default Key
: You may use up to four different keys for four different networks. Select
the current key that will be used.
Key 1-4
: You may enter four different WEP keys.
Click on the
Apply
button to save the changes.
6.5.1.2
Wireless Security – WPA-PSK, WPA2-PSK,
Security
Mode
: Select
WPA-PSK,
or
WPA2-PSK
from the drop-down list if your
wireless network uses WPA pre-shared key.
