Long Range Wireless Access Point / Client Bridge
Version 1.0
44
6.3 System
Click on the
System
link on the navigation
drop-down menu. You will then see System
Properties setting, which is described below.
6.3.1 System Properties
Click on the
System Properties
link under the
System
drop-down menu. This page
allows you to switch the operating mode of the device, as well as specify a name and
select the operating region.
Device Name
: Specify a name for the device (this is not the SSID),
Country/Region
: Select a country from the drop-down list.
Operating Mode
: Select and operating mode. Configuration for each operating
mode is described in their respective chapters.
Click on the
Apply
button to save the changes.
6.4 Router
Click
on
the
Router
link on the navigation
drop-down menu. You will then see three
options: WAN settings, LAN settings, and
VPN Pass Through. Each section is
described in detail below.
6.4.1 WAN
Settings
Click on the
WAN Settings
link under the
Router
drop-down menu. This page allows
you to configure the WAN interface as DHCP, Static IP, or PPPoE.
