EnGenius ENH200EXT Скачать руководство пользователя | Manualshive

Страница: 84 / 86

background image

D.3 – Europe Declaration of Conformity

This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following
test methods have been applied in order to prove presumption of conformity with the essential
requirements of the R&TTE Directive 1999/5/EC:

-

EN60950-1:2006 A11:2009
Safety of Information Technology Equipment

-

EN50385 : 2002

-

Generic standard to demonstrate the compliance of electronic and electrical apparatus with the
basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz)

-

EN 300 328 V1.7.1: 2006-10

-

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission
systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread
spectrum modulation techniques; Harmonized EN covering essential requirements under article
3.2 of the R&TTE Directive

-

EN 301 489-1 V1.8.1: 2008-04
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility
(EMC) standard for radio equipment and services; Part 1: Common technical requirements

-

EN 301 489-17 V2.1.1 2009-05

-

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility
(EMC) standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz
wideband transmission systems and 5 GHz high performance RLAN equipment

This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member
states and EFTA countries, except in France and Italy where restrictive use applies.

In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain
authorization to use the device for setting up outdoor radio links and/or for supplying public access to
telecommunications and/or network services.

This device may not be used for setting up outdoor radio links in France and in some areas the RF
output power may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz. For
detailed information the end-user should contact the national spectrum authority in France.

«
...
82
83
84
85
86
»

Содержание ENH200EXT























































































Отзывы:

Нет отзывов

Похожие инструкции для ENH200EXT

Бренд: T-Mobile Страницы: 4

Бренд: TRENDnet Страницы: 2

Бренд: Inscape Data Страницы: 29

Бренд: LINOVISION Страницы: 17

WNR3500 - RangeMax Next Wireless-N Gigabit Router Wireless

Бренд: NETGEAR Страницы: 124

Бренд: Xunison Страницы: 12

Бренд: Ubiquiti Страницы: 17

Бренд: Edimax Страницы: 16

Бренд: Last Mile Gear Страницы: 19

Бренд: Draytek Страницы: 1

Бренд: 4next Страницы: 2

Бренд: ZyXEL Communications Страницы: 164

Бренд: Minitar Страницы: 77

Бренд: BlueExpert Страницы: 4

Бренд: Jaton Страницы: 8

Бренд: P2 Wireless Technologies Страницы: 15

Бренд: Proxim Страницы: 72

Бренд: Wireless interactive Страницы: 58

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды