8.2 Wireless Security Settings
The Wireless Security Settings section lets you configure the EOH200’s security modes: WEP,
WPA-PSK, WPA2-PSK, WPA-PSK Mixed, WPA, WPA2, and WPA Mixed. We strongly
recommend you use WPA2-PSK.
8.2.1 WEP
Security Mode
Select WEP from the drop-down list to begin the configuration.
Auth Type
Select Open System or Shared.
Input Type
Select an input type of Hex or ASCII.
Key Length
Level of WEP encryption applied to all WEP keys. Choices are
Select a 64/128/152-bit password lengths.
Default Key
Specify which of the four WEP keys the OM2P-LC/OM2P-HS uses
as its default.
Key1
Specify a password for security key index No.1. For security, each
typed character is masked by a dot (
●
).
Key2
Specify a password for security key index No.2. For security, each
typed character is masked by a dot (
●
).
Key3
Specify a password for security key index No.3. For security, each
typed character is masked by a dot (
●
).
Key4
Specify a password for security key index No.4. For security, each
typed character is masked by a dot (
●
).
