EnGenius ECW230, Руководство пользователя

Страница: 17 / 65

17
1
2
Ceiling Mount an Access Point
1) Slide the ceiling mount base into the slot of the Access
Point.
2) Hold the Access Point with one hand to reach the other
hand over the T-Rail sides of the bracket. Then hook the
stationary end of the ceiling mount bracket onto the
T-Rail.
3
4
5
Wall Mount an Access Point
3) Continued from A, determine where the Access Point
to be placed and mark location on the surface for the two
mounting holes. Use the appropriate drill bit to drill two
8.1mm diagram and 26mm depth holes in the markings
and hammer the bolts into the openings.
4) Screw the anchors unto the holes until they are flush
with the wall ; screw the included screws into the anchors.h
5) Place the Access Point against wall with the mounting
screw heads.