EnGenius EAP350 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 58

background image

57

Appendix A – FCC Interference Statement

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.



Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this
equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:
FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with FCC RF Exposure limits set forth for an uncontrolled environment, under 47 CFR 2.1093 paragraph (d)(2).
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

«
...
56
57
58

Содержание EAP350



























































Отзывы:

Нет отзывов

Похожие инструкции для EAP350

Бренд: Magellan Страницы: 24

Бренд: Zenitel Страницы: 29

Бренд: Enterasys Страницы: 36

Spectrum24 AP-41X1-1050 HR

Бренд: Symbol Страницы: 2

Бренд: TRENDnet Страницы: 2

AirborneM2M APX-Q5 Series

Бренд: B&B Electronics Страницы: 105

Бренд: EE Страницы: 207

Бренд: TP-Link Страницы: 2

Aruba 318 Series

Бренд: Hewlett Packard Enterprise Страницы: 2

CP-2W - iPAQ Connection Point

Бренд: Compaq Страницы: 94

Бренд: Digi Страницы: 9

Бренд: Bountiful Страницы: 1

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 6

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды