7
3.
Battery must be recycled or disposed of properly. Do not dispose
the battery in a fire. The cells may explode.
4.
Do not dispose of the battery in municipal waste. Check with local
codes for disposal instructions.
5.
Exercise care in handling the batteries in order not to short-circuit
the battery with conductive materials such as rings, bracelets, keys,
pocketknife, and coins. The battery or conductive material may
overheat and cause burn or fire.
6.
Do not expose batteries to rain or water.
7.
Do not open or mutilate the battery. Released electrolyte is
corrosive and may cause injury to eyes or skin. The electrolyte may
be toxic if swallowed.
8.
During charging, the battery heats up. This is normal and is not
dangerous.
8
Regulatory Information
DuraFon PSL
FCC ID: A8J-922PSLBU(Base), U2M-SP922PRO(Handset)
IC: 10103A-922PSLBU(Base), 3616C-SP922PRO(Handset)
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1)
this device may not cause harmful interference, and
2)
this device must accept any interference received, including interference
that may cause undesired operation.
Privacy of communications may not be ensured when using this phone.
Base Station
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
