43
handset will show ID “00”.
Notes:
1.
The base has a 30 second registration timeout starting from pressing
the
REG
button. The handset has a 12 second registration timeout
starting from the time registration or de-registration option has been
selected. The base and handset will automatically exit registration
mode after timeout.
2.
Repeat registration or de-registration process if unsuccessful.
Advanced Registration:
1. Advanced registration functions can be performed by administrator
handsets (ID 10 and 11) only.
2. Administrator handsets can perform advanced registration function
as long as it is within range with the base station. The base station
does not need to be in registration mode.
3. De-register a Handset ID by administrator:
a. Make sure that the administrator handset is within the coverage
range of the base station.
b. Press administrator handset
MENU
(Right) soft key
c. Press the number
9
, this will enter the handset administration
menu.
d. Press number
1
, handset enters system setting menu.
e. Press number
4
, and enter the two-digit Handset ID to be
cleared.
f.
Upon successful operation, the handset LCD will display “Done”,
otherwise it will show “Message not received, try again”.
4. Obtain a Specific Handset ID:
a. If a particular Handset ID is preferred over sequentially assigned
ID, the administrator can “tell” the base in advance what the
next ID assignment should be.
b. Press administrator handset
MENU
(Right) soft key.
c. Press the number
9
, this will enter the handset administration
menu.
d. Press number
1
, handset enters system setting menu.
e. Press number
5
, and enter the two-digit Handset ID to be
assigned next by the base.
f.
Upon successful operation, the handset LCD will display “Done,”
44
otherwise it will show “Message not received, try again.”
g. If the handset ID is already in use by another handset, the
administrator will be alerted. In that case, the administrator can
choose another ID or asks the handset having the desired ID to
vacate by de-registering with the base.
h. Perform registration immediately afterward for the handset
desiring a specific ID to ensure that the ID is not taken by
another handset.
5. Remotely register Handset :
a. If base install in ceil or higher location, administrator handsets
can perform remote registration.
b. Press administrator handset
MENU
(Right) soft key
c. Press the number
6
, this will enter registration mode.
d. Press number
3
, this will replace the procedures to press &
hold the base
REG
button until the 4 LEDs come on.
e. Proceeding the handset registration process for new handsets.
Notes:
1.
De-registration by the administrator will disable a handset’s ability
to use the base station to make or receive phone calls. This also
frees up the ID for future registration.
2.
Handsets de-registered by the administrator can still perform
intercom to other handsets.
Handset Group Subscription
1. Up to nine handset groups (01-07) can be defined and handsets can
decide which group(s) they want to be in.
2. For example, Group 1 represents the Customer Service Group,
Group 2 represents the Sales Group, and Group 3 is the Marketing
Group. Suppose that Handset 11 wants to receive incoming rings
for all Sales and Marketing related calls. Then handset 11 will need
to “subscribe” to Group 2 and Group 3.
3. Group Selections:
a. Press handset
MENU
5
to enter the handset setting menu
b. Press number
2
, handset enters group select menu.
c.
Press
ADD
soft key and enter two-digit group number (01~07)
to add membership in a group.
