d. The two-digit index on the upper right corner of the LCD display shows the location in
ascending order, with 01 being the most recent call.
e. While viewing any of the three call logs, press
DIAL
(Left) soft key to dial the phone
number.
Notes:
1. Only phone numbers are stored in the three call logs.
Intercom calls are not recorded.
2. Caller ID service is required from your local phone company in
order to receive phone numbers, names and time stamps on
incoming calls. The Received and Missed Call Logs will
register no incoming calls if Caller ID service is not available.
5. Press “4” to set sound-related settings:
a. Press “1” to select ringer volume:
Use
¿
or
À
to
scroll through 5 options: Low, Vibrate, Off,
High-then-Vibrate, and High. Press
SAVE
(Left) soft key to save selection. Default =
High.
b. Press “2” to select ringer tone:
Use
¿
or
À
to
scroll through 4 options: 0, 1, 2, and 3. Press
SAVE
(Left) soft key to save selection. Default = 0.
c. Press “3” to select key volume when a key is pressed:
Use
¿
or
À
to
scroll through 3
options: High, Low, and Off. Press
SAVE
(Left) soft key to save selection. Default =
Low.
d. Press “4” to select key tone:
Use
¿
or
À
to
scroll through 4 options: 0, 1, 2, and 3. Press
SAVE
(Left) soft key to save selection. Default = 0.
6. Press “5” to change handset settings:
a. Press “1” to set dialing prefix:
i.
Use
¿
or
À
to scroll and select to turn on or off the dialing prefix feature. Default =
Off.
ii. If “On” is selected, the handset is prompted to enter a prefix, up to 14 digits.
iii. Use “Delete” (Right) soft key and
¿
or
À
to edit prefix.
iv. When this feature is turned on, the LCD will prompt the user on each outgoing phone
call except during redial or dialing by pressing the TALK key first whether to use the
dialing prefix. The current prefix is also displayed. Press “
Yes
” (Left) or “
No
” (Right)
soft key to add the prefix to the beginning of the number.
v. This feature is useful for access code, calling card, and credit card calls, etc.
b. Press “2” to Group Select: see Handset Group Subscription.
c. Press “3” to set or turn Call Forwarding on or off. Default = Off. See Call Forwarding.
d. Press “4” to clear call logs and phonebook:
i. Press ‘1” and confirm to delete the entire phonebook.
ii. Press “2” and confirm to clear the three call logs (Called, Received, and Missed).
e. Press “5” to change the power-up LCD display to show, e.g., customer name or other
greeting message:
i.
Use
¿
or
À
to move the cursor backward or forward to insert (to the left of the cursor)
or delete (the character above the cursor, or left of the cursor if cursor is on the right
of the last character).
ii. Enter characters using the Character Table and method discussed in the Phonebook
section.
iii. When finished, press
SAVE
(Left) soft key to save change.
f.
Press “6” to change LCD display contrast:
i.
Use
¿
or
À
to scroll through values 1 to 16. Pick one that is most suitable to you.
Default = 10.
ii. Press
SAVE
(Left) soft key to save setting.
g. Press “7” to change the LCD backlight:
