Advanced Operations
Handset Registration
1. If your handset is purchased as part of a system, it has been pre-
registered with the base station at the factory.
2. If the Handset ID reads “00,” that means it is a new handset or the ID
has been erased. You need to register the handset with the base
station. In certain situations, you may want to change a handset’s ID.
For example, you want to change a particular handset from a user to an
administrator (ID 10 or 11), or vice versa. Or in some rare occasions,
you find another handset having the same Handset ID.
3. Registration:
a. Press MENU-6 to enter the registration mode
b.
Press and hold the base’s Registration (REG) button for 2
seconds until the L1, L2, L3, and L4 LED come on.
c. Press handset key “1”, this completes the registration
process. The base station will assign a handset ID
between 10 and 99. The assigned ID will be displayed on
the handset LCD, indicating successful registration.
d. Repeat above steps for all additional handsets.
e. The first two handsets registered will be given ID 10 and
11, which gives them administrator privileges.
4. De-registration:
a. You can de-register a handset from a base. De-registration will
reset the Handset ID to 00, erase the system security code, and free
up the old ID for future registration.
b. After deregistration, the handset will not be able to use the base to
make or receive phone calls, nor can it intercom other handsets.
c.
Press handset
MENU
(Right) soft key.
d. Press the handset number key “6”, this will enter the handset
registration menu.
e. Press and hold the base’s REG button for 2 seconds until L1, L2,
L3, and L4 LED come on.
f.
Press the handset number key “2”, this completes the de-
registration process. Upon successful de-registration, the handset
will show ID “00”.
Notes:
1. The base has a 30 second registration timeout starting from
pressing the REG button. The handset has a 12 second
registration timeout starting from the registration or de-
registration option has been selected. The base and handset
will automatically exit registration mode after timeout.
2. Repeat registration or de-registration process if unsuccessful.
Advanced Registration:
1. Advanced registration functions can be performed by
administrator handsets (ID 10 and 11) only.
