ENFORCER Surface-Mount Wave-to-Open Sensor with Manual Override Button
4
SECO-LARM
U.S.A., Inc
Sample Installation:
Typical installation with an electric lock:
Care and Cleaning of the Sensor:
The sensor requires special care to ensure reliability and a long operating life.
1.
Use a soft, clean cloth for cleaning. Use the mildest type of cleaner available.
2.
When cleaning, spray the cleaning solution onto the cleaning cloth instead of the unit.
3.
Be sure to wipe off any excess liquid from the sensor. Wet spots may affect the sensor’s
performance.
California Proposition 65 Warning:
These products may contain chemicals which are known to the State of California
to cause cancer and birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov
.
NOTICE:
The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM
reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All
trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2020
SECO-LARM U.S.A., Inc. All rights reserved.
WARRANTY:
This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for one (1) year from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or
replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if
damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration,
improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such
equipment is not operating properly as a result of causes other than defects in material and workmanship. The sole
obligation of SECO-LARM and the purchaser’s exclusive remedy, shall be limited to the replacement or repair only, at
SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential
personal or property damage of any kind to the purchaser or anyone else.
IMPORTANT:
Users and installers of this product are responsible for ensuring that the installation and configuration of
this product complies with all national, state, and local laws and codes related to locking and egress devices.
SECO-LARM will not be held responsible for the use of this product in violation of any current laws or codes.
IMPORTANT WARNING:
For a weatherproof installation, ensure the unit is installed so that there is a good seal between
the enclosure base and the mounting surface. Incorrect mounting may lead to exposure to rain or moisture in the
enclosure which could cause a dangerous electric shock, damage the device, and void the warranty. Users and installers
of this product are responsible for ensuring this product is properly installed and sealed.
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Phone: (949) 261-2999 | (800) 662-0800 Email: [email protected]
PITSW2
MI_SD-9773-KNEVQ_201123.docx
Green wire
Blue wire
