ENFORCER Passive VGA Balun
SECO-LARM U.S.A., Inc.
Troubleshooting
WARRANTY
This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,
repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines
that such equipment is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at
SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential
personal or property damages of any kind to the purchaser or anyone else.
NOTICE:
The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right
to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2012 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in
whole or in part, without the written permission of SECO-LARM.
16842 Millikan Avenue, Irvine, CA 92606
Website: www.seco-larm.com
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
E-mail: sales
@
seco-larm.com
MVE-SV010Q_1208.docx
PITSW4
.docx
Also Available from SECO-LARM
:
Use shielded twisted pair (STP) cable.
Check the sync mode switch.
Check the sync balancing DIP switch.
Check that the cable length is within the given limits of the resolution
being used.
Replace with a higher-grade cable. The balun works with Cat5, but Cat5e
and Cat6 allow for longer range operation.
Make sure the source and displays are powered.
Make sure the transmitter and receiver are plugged into the correct units.
Image is weak, faded, or blank.
Active VGA and Audio
Distributors over Cat5e/6
HDMI Matrix
Wireless HDMI Extenders
HDMI Switcher
HDMI over Cat5e/6
Component Video Baluns
Over Cat5e/6
4
