ENFORCER Room Occupancy Monitor
2
SECO-LARM U.S.A., Inc.
The ENFORCER Room Monitor can be used to monitor the occupancy status of rooms in high
traffic areas: restrooms, fitting rooms, etc. The Room Monitor uses PIR and phototransistor
sensors to monitor the occupancy of a room. The 1-Room Indicator includes additional features,
such as a built-in buzzer and service button input, for applications where occupants may need
assistance. The 2-Room Indicator is ideal for monitoring multiple rooms at once.
Introduction:
What's Included in the Room Monitor Kit (RM-R100-KB1Q):
Overview:
Pairing button
Micro USB Power input
PIR Sensor
Phototransistor
LED Indicator
Phototransistor ON/OFF jumper*
LED ON/OFF jumper*
PIR ON/OFF jumper*
Sensor
Wire pass-through
See "Wiring Using Screw Terminals" on pg. 6 for details
Service pairing button (1-Room Indicator) / Ch2 Pairing button
(2-Room Indicator)
Ch1 Pairing button
Micro USB power input
LED Indicators**
Antenna
Buzzer
(1-Room Indicator only)
Buzzer ON/OFF jumper* (1-Room Indicator only)
Indicators
*Phototransistor jumper's default is OFF, other jumpers' default is ON
**2-Room Indicator has 4 LED indicators (2 for each channel).
Wire pass-through
See "Wiring Using Screw Terminals" on pg. 6 for details
1x Sensor
1x 1-Room Indicator
2x USB Power cords
1x Indicator decal
1x Manual
2
