17
3.1.2 Inserting The SIM
Insert the SIM using the following procedure:
The SIM card is not provided with the MT 3050 device. The SIM must be obtained
from the GSM/GPRS service provider and must be provisioned by the operator for
data. Always take care to protect the SIM. Without the SIM installed, the MT 3050
modem is not able to communicate on the network.
1. Using the correct tool, carefully remove the device cover to access the internal SIM holder as pre-
viously described.
2. Insert the SIM into the SIM holder of the MT 3050.
3. Replace the cover as described in the next section.
3.1.3 Closing The Device
Replace the MT 3050 cover by using the following steps:
A. Place the MT 3050 cover onto the base as shown in the following figure.
1. Apply gentle downward pressure to the back of the cover first as you carefully slide the cover
into place.
2. Apply gentle down and forward pressure to the front of the cover until it snaps shut.
