Enfora Enabler IIIG M2M Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 90

background image

www.agelectronica.com www.agelectronica.com

www.agelectronica.com www.agelectronica.com

Enfora Enabler IIIG M2M
Modem Integration Guide

1. Safety Precautions

1.1. Important Safety Information

The following information applies to the devices described in this manual. Always observe all standard and
accepted safety precautions and guidelines when handling any electrical device.

•

Save this manual: it contains important safety information and operating instructions.

•

Do not expose the Enfora Enabler IIIG product to open flames.

•

Ensure that liquids do not spill onto the devices.

•

Do not attempt to disassemble the product: Doing so will void the warranty. With the
exception of the Subscriber Identification Module (SIM), this product does not contain
consumer-serviceable components.

2. Regulatory Compliance FCC

2.1. Integration Considerations and Installation Requirements

The Enabler IIIG modem is designed for use in a variety of host units, "enabling" the host platform
to perform wireless data communications. However, there are certain criteria relative to
integrating the modem into a host platform such as a PC, laptop, handheld or PocketPC

®

, monitor

and control unit, etc. that must be considered to ensure continued compliance with FCC
compliance requirements.

•

Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.

•

In order to use the Enabler IIIG modem without additional FCC certification approvals, the

installation must meet the following conditions:

Maximum RF output power and antenna gain to meet Maximum Permissible Exposure
Requirements: GSM850 mode: Power at antenna port is +32 dBm. The maximum gain
is 4.5 dBi (2.35 dBd). GSM1900 mode: Power at antenna port is 31.3 dBm. The
maximum gain is 2 dBi in order to meet the requirements of maximum 2 watts EIRP for
mobile transmitters. If RF power and/or antenna gain is desired, a separate FCC
certification is required.

•

If used in a "portable" application such as a handheld or body worn device with the
antenna less than 20 cm (7.9 in.) from the human body when the device is operating,
then the integrator is responsible for passing additional "as installed" testing and the
device will require it’s own FCC ID:

•

SAR (Specific Absorption Rate) testing, with results submitted to the FCC for
approval prior to selling the integrated unit. If unable to meet SAR requirements,
then the host unit must be restricted to "mobile" use (see below).

GSM0308IG002

1

Version 1.05 – 11/13/08

«
...
4
5
6
7
8
...
»

Содержание Enabler IIIG M2M



























































































Отзывы:

Нет отзывов

Похожие инструкции для Enabler IIIG M2M

Photo Backup Stick Universal

Бренд: Paraben Страницы: 10

Бренд: Multitech Страницы: 32

Бренд: Sigrand Страницы: 42

Spectrum D3.1 eMTA

Бренд: Charter Страницы: 12

NetLink 1082/144/I

Бренд: Patton electronics Страницы: 28

Бренд: Alcatel Страницы: 33

Zlinx Xtreme ZXT24-RM

Бренд: B&B Electronics Страницы: 163

Бренд: LG Innotek Страницы: 36

Бренд: PROLiNK Страницы: 8

Direcway DW6000

Бренд: Hughes Страницы: 76

Бренд: RCA Страницы: 9

Бренд: Raymar Страницы: 2

EZ Connect SMC2642W

Бренд: SMC Networks Страницы: 22

Бренд: ICP DAS USA Страницы: 8

Бренд: ZIV Страницы: 39

Бренд: Huawei Страницы: 3

Бренд: Huawei Страницы: 20

E397 4G LTE Mobile Internet Key

Бренд: Huawei Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды