Enfora Enabler EDG0208, Руководство интегратора

Страница: 58 / 65

Integration Guide
Draft
EDG0208IG001 Page 53 Rev. 1.03 –4/19/07
11.3.8 Instructions to the Original Equipment Manufacturer (OEM)
To comply with the requirements of the National Environmental Policy Act (NEPA) of 1969, operation of
an FCC-regulated transmitter may not result in human exposure to radio frequency radiation in excess
of the applicable health and safety guidelines established by the FCC. Further information on RF
exposure issues may be found in the FCC's Office of Engineering and Technology (OET) Bulletin
Number 65, "Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency
Electromagnetic Fields" and Supplement C, "Additional Information for Evaluating Compliance of Mobile
and Portable devices with FCC Limits for Human Exposure to Radio Frequency Emissions.” Both of
these documents are available via the Internet at the OET web site:
http://www.fcc.gov/oet
The Enfora Enabler IIE products are GSM radio transceivers, which operate under the authority of 47
CFR Part 24, Subpart E and Part 22 of the FCC Rules and Regulations. When installed and operated
in accordance with the instructions provided in this manual, these devices comply with current FCC
regulations regarding human exposure to radio frequency radiation.
The following installation and operation restrictions apply to all Enfora Enabler IIE products:

This device may only be used in fixed and mobile applications.

Portable applications, as defined by the FCC, are prohibited.

The use of this device for desktop and other applications where the antenna can easily be
relocated are considered by the FCC to be mobile applications.

A separation distance of at least 20 cm (7.87 inches) between the antenna and the body
of the user and other persons must be maintained at all times

End products must provide instructions to ensure compliance with radio frequency
radiation exposure requirements.

A warning label visible to all persons exposed to the antenna and identical to that
described in this manual must be displayed on or next to the antenna.

Separate FCC approval for RF exposure compliance is required for end products that do
not meet these conditions.