Integration Guide
Draft
EDG0208IG001
Page 44
Rev. 1.03 –4/19/07
2.
Configure the COM port as displayed below.
Figure 21 COM Port Settings
10.1.2
Initialization (AT Command Interface)
In the GSM vocabulary, a call from GSM mobile to the PSTN (Public Switched Telephone Network) is called
a "mobile-originated call" or "outgoing call". A call from the fixed network to a GSM mobile is called a
"mobile-terminated call" or "incoming call."
In the following examples, “Entry” refers to the application. The following convention describes the direction
of the data exchange:
The data exchange from the customer application to the Enfora Enabler EDG0208 module is
designated as:
Entry
The data exchange from the Enfora Enabler EDG0208 module to the customer application is
designated as:
Response
Note:
With the exception of the +++ command (Online Escape Sequence), all commands must be
preceded by the AT attention code (or command prefix) and terminated by pressing the <CR>
character.
In the following examples, the <CR> and <CR><LF> are intentionally omitted for clarity and space.
Содержание Enabler EDG0208
