19
N.B.
: It is possible to change the setting of your unit such that if the
thermostat does not call for heat after 45 minutes, the unit will remain at the
lowest heat setting (#1) but will not shut down (this is the PILOT ON mode).
The stove will remain at the lowest heat level until the thermostat calls for
heat again. If you prefer that your unit runs following that logic, you need to
change the setting to PILOT ON by the pressing the following two buttons
on the PC Board:
First press
, hold it, and then press
. Hold the two buttons for
a couple of seconds.
Once you do that, the letters P, I, L, O, T, O, N will appear on the PC Board
to let you know that you are in the “PILOT ON” mode. If you wish to go
back to the default thermostatic mode (i.e. the unit shuts down after 45
minutes if the thermostat does not call for heat), simply press the same two
buttons again for a couple of seconds. The letters P, I, L, O, T, A, U, T, O
will appear on the PC Board to let you know that you are in the “PILOT
AUTO” mode.
NOTE:
When in thermostatic mode:
•
You should not operate the manual control or play with the
temperature setting.
•
YOUR THERMOSTAT SHOULD BE INSTALLED BY AN
AUTHORIZED DEALER OR QUALIFIED TECHNICIAN.
D = MINIMUM DISTANCE 15 FEET
SHOULD BE AVOIDED
Figure 41
Thermostat location
