Enertech Bentone B2S Classic, Инструкция по установке и обслуживанию, Страница: 11 / 24

11
05. MAINTENANCE
Suspension of burner
During service the burner can be hung up on the screw in the burner flange.
For this there is a hole on the right side of the burner.The blast tube,
shrouded disc, nozzle and electrodes are then easily accessible.
Removing the blast tube
1. Loosen the two fastening screws one turn.
2. Turn to the right and withdraw the blast tube.
Setting the ignition electrodes
Proper setting of the electrodes is essential to ensure satisfactory opera-
tion of the burner. If the spark hits the metal the efficiency will be lower and
will also cause radio disturbance. There is also a risk that carbonisation
will occur. Since the electrode pack is of the factory-set twin electrode
type it will be necessary to bend the wires to make any adjustment.
171 755 05 02-01
1,8-2,2
6,0-7,0
1,2-1,6