Manual
Operation Manual for
ZeMa Single Cells
Prepared on: 23-11-2022
Prepared by: GBA
Released on: 04.01.2023
Released by: -
Revised on: -
Index: _-
Distributed to: customer (public)
Pages: 3/35
This document is uncontrolled when printed. For the most current and official copy, check the server.
Rail Engineering
Tel. +49 (0) 2331/372 591
Dieckstrasse 42
Fax +49 (0) 2331/372 804
DE-58089 Hagen
www.enersys.com
1.
About this document
1.1
General Information
This document provides instructions and technical information for the operation and
service of rolling stock single cell batteries in Railway applications. It covers the product
range of 2V ZeMa
Rail
single cells with VRLA (AGM), TPPL+Sn Technology:
•
ZeMa200P18
•
ZeMa270P12
•
ZeMa340P12
•
ZeMa450P21
DO NOT commence operating or working on the battery until the “EMEA 2VZeMa Rail
Cells Operation Manual” instructions have been carefully read. Please file the documents
for future consultation. Additionally please study the technical documents about your
battery system and your application.
Additionally you study the technical documents about your battery system and your
application.
Paying close attention to these instructions will avoid possible hazards that can be
caused by batteries, it will also reduce future repair and/or down time and will help
increase the service life of the battery. Ignoring the operating instructions and repairing
batteries with non-original parts will void the battery warranty. All failures, malfunctions or
faults of the battery, the charger or any other accessories, must be notified to our After
Sales Service immediately.
1.2
Definitions and Abbreviations
AGM
Absorbent Glass Mat
PbSn
Lead tin (Alloy)
BMS
Battery Monitoring System
DOD
Depth of Discharge
NTC
Negative Temperature Coefficient
OCV
Open Circuit Voltage
TPPL
Thin Plate Pure Lead (EnerSys Technology)
TPPL+Sn Thin Plate Pure Lead with PbSn (EnerSys Technology)
SOC
State of charge
Vpc
Volt per cell
VRLA
Valve Regulated Lead Acid (battery)
V-0
Fire protection classification acc. UL-94 or EN 60695-11-10
(EnerSys uses V0 in type designation)
ZeMa
Zero Maintenance
