MAINTENANCE
AND ORDERING
INFORMATION
THERE ARE NO USER
REPLACEABLE PARTS
OTHER THAN THE FUSE.
THE CHARGER IS A
SEALED UNIT AND
SHOULD THEREFORE
NOT BE DISMANTLED
FOR ANY PURPOSE.
1.
Each charger is
supplied with an extra
fuse for 115 V AC
operation. Replace any
blown fuses with the
following types which
are readily available
through most electrical
supply sources:
115 V AC – Fuse type –
1A, T1AL
230 V AC – Fuse type –
500mA, T500mAL
The fuse holder is
located on the under
side of the charger,
adjacent to the voltage
selector switch. To
replace a blown fuse,
unscrew the fuse holder
cover anti-clockwise.
Remove the blown fuse,
place the new fuse in
the fuse holder, replace
the cover and screw
clockwise back into the
holder.
2.
Refer to the
troubleshooting guide if
the charger is not
working properly, or see
the cap lamp user
manual for lamp and
battery operating
instructions.
