EnerSys alpha CXPS-E3 страница 29 Скачать руководство пользователя

Страница: 29 / 64

9400016-J0 Rev E

User Guide

CXPS-E3

5. Inspection

5.1 Packing materials

Alpha Technologies is committed to providing products and services that meet our customers’ needs and

expectations in a sustainable manner, while complying with all relevant regulatory requirements. As such Alpha

Technologies strives to follow our quality and environmental objectives from product supply and development

through to the packaging for our products.
Rectifiers and batteries are shipped on individual pallets and are packaged according to the manufacturer’s

guidelines.
Almost all of Alpha’s packaging material is from sustainable resources and or is recyclable. See the following

table for the material and its environmental codes.

5.1.1 Returns for service

Save the original shipping container. If the product needs to be returned for service, it should be packaged in its

original shipping container. If the original container is unavailable, make sure that the product is packed with at

least three inches of shock-absorbing material to prevent shipping damage.

NOTE

Alpha Technologies is not responsible for damage caused by improper packaging of returned

products.

5.2 Check for damage

Before unpacking the product, note any damage to the shipping container. Unpack the product and inspect the

exterior for damage. If any damage is observed, contact the carrier immediately. Continue the inspection for any

internal damage. In the unlikely event of internal damage, inform the carrier and contact Alpha Technologies for

advice on the impact of any damage.

5.3 General receipt of shipment

The inventory included with your shipment depends on the options you have ordered. The options are clearly

marked on the shipping container labels and bill of materials.
Call Alpha Technologies if you have any questions before you proceed: +1.888.462.7487

Cardboard

Polyethylene

Terephthalate

Low Density

Polyethylene

Polystyrene

Steel

Aluminum

Wood

Packing boxes

Caps

Flexible film

Packaging

Bubble wrap

Shrink wrap

Plastic bags

Foam

Strapping on

pallets

Strapping on

pallets

Pallets

Lumber

Содержание alpha CXPS-E3

































































Результаты поиска

Содержание alpha CXPS-E3

Отзывы:

Похожие инструкции для alpha CXPS-E3

Бренды по названию

Популярные бренды

EnerSys alpha CXPS-E3, Руководство пользователя

Результаты поиска

Содержание alpha CXPS-E3

Отзывы:

Похожие инструкции для alpha CXPS-E3

Бренды по названию

Популярные бренды