4.0 Web Interface, continued
25
704-939-B10-001 Rev. A5 (06/2019)
Use the following procedure to configure a static IP address on a laptop or computer with the Windows
®
7 operating
system:
1. Click the Start button (lower left button on most Windows
®
computers).
2. When the window pops up, click Control Panel (usually about half the
way down the second column).
3. Click Network Connections.
4. Right-Click Local Area Connection link to open menu box.
5. Click the bottom option Properties.
6. You will see a dialog box much like Fig. 4-2; select Internet Protocol
(TCP/IP) and then click the Properties button.
Fig. 4-2, Local Area Connection
Properties Screen, Windows
®
7
1. The Internet Protocol (TCP/IP) Properties dialog box will open (Fig.
4-3). Select “Use the following IP address”. Enter the values as shown
(i.e. IP address 192.168.100.2, or DHCP assigned IP address, and
Subnet mask 255.255.255.0). Record the existing IP address and
Subnet mask in order to later return the computer to its original state.
2. Click the OK button and try to connect to the DM3X once again using
192.168.100.1 in the Web browser.
3. To restore network settings, repeat Steps 1 through 6 but in step 7 click
check box for “Obtain IP address automatically or, manually set back to
the original settings recorded in Step 7.
1. Fig. 4-3, Internet Protocol (TCP/IP)
Properties Screen, Windows
®
7
If you are unable to view the home page of the DM3X Transponder using IP address 192.168.100.1, the network
configuration on the computer that is being used to connect to the DM3X Transponder may require a temporary
static IP address (192.168.100.2) to be configured.
NOTICE
:
