EnerPro EPA1050, Инструкция по установке и эксплуатации

Страница: 4 / 58

EPA Series - Installation and Operation Manual
4 EnerPro Boiler-EPA Series- IOM
1. SAFETY INSTRUCTIONS
1.1 Symbols
The following symbols are used in this document to emphasize certain instructions. This is in order to increase your
personal safety and to safeguard the technical reliability of the boiler.
CAUTION
Indicates a potentially hazardous situation which, if ignored, may result in minor injury or product/
property damage.
WARNING
Indicates a potentially hazardous situation which, if ignored, can result in danger, serious injury or
substantial product/property damage.
DANGER
Indicates the presence of a hazardous situation which, if ignored, will result in death, serious injury
or substantial product/property damage.
READ
Indicates recommendations made by EnerPro Boilers for the installers which help to ensure optimum
operation and longevity of the equipment.
Professional licensed heating
contractor
The assembly, installation, adjustment,
service and maintenance of this boiler must
be performed by a professional licensed
heating contractor.
Boiler Documentation
Make sure to read all documentation related
to the product before starting the installation.
The product documentation should be stored
near the boiler where it can be accessed
for future reference.
Advice for the owner
When the installation has been
completed, the heating contractor has to
familiarize the operator/owner with the
installed equipment as well as any safety
precautions and requirements, and shut-
down procedures. The heating contractor
also needs to inform the operator/
owner of the need for professional
annual servicing of the boiler prior to the
heating season.
Contaminated air
Chemicals can contaminate the air and
cause by-products during the combustion
process. These by-products are poisonous
to the occupants and very destructive to
EnerPro boilers.
Carbon monoxide
Flue products can flow into living spaces if
improperly installed, adjusted, serviced or
maintained. The flue gases contain carbon
monoxide which is poisonous.
Fresh air
Adequate ventilation and combustion air
must be provided for the equipment as it
requires fresh air for safe operation. Make
sure the equipment is installed ensuring an
adequate supply of fresh air.
Boiler venting
Always operate the boiler with an installed
vent system. Carbon monoxide poisoning
can be caused by an improperly installed
vent system. All combustion products must
be vented safely to the outdoors.
Note: Some products may not be exactly as illustrated.
Information contained herein is deemed as accurate as
possible. Clarification of material supply, pipe sizing,
thread type, and typographical errors should be noted
as soon as possible. Dimensions have been converted
from the Metric standard. Fractional rounding may affect
dimensional tolerances.
Warranty
The information in this manual and any other related
manuals must be read and proper procedures followed.
The warranty is rendered null and void if the procedures
are not followed as prescribed.